JOOBY AQUARIS SNS WIZE01 100
Smart external connection sensor for ZENNER water meters
This inductive sensor is designed to transmit data from analog water meters to the pulse radio module Jooby OMNI RM LoRaWAN 4PU 200/204/205 EU.
This device is installed on the water meter’s enclosure and connected to the radio module. The sensor then begins to register the number of revolutions of the meter’s measuring hand and transmits the received data in the form of pulses to the radio module.
*LoRaWAN is a registered trademark of Semtech Corporation.
- Remote data collection ZENNER ETKD-ZR (ETKD-M, ETKD-M-P)*
- Average lifetime 10 years (1 data transfer per day)**
- Mounting up to 5 minutes
After installation of the sensor on the meter’s enclosure and activation of the radio module, the process of data reading is initiated. The information is sent by transmitting the counted pulses from the sensor to the radio module, with their number corresponding to the number of revolutions of the water meter hand or a multiple of it.
The data is transmitted through a cable 1.5 meters long, using a PY07-6 connector.
The recorded information is stored in the radio module’s non-volatile memory. Later, at certain time intervals, the data is automatically transmitted to the server of the resource provider using the LoRaWAN network.
The received information is processed by the metering system, which converts it into visible readings. This mechanism enables the resource provider to observe and analyze resource consumption in real time.
- Sensor model – Jooby Aquaris SNS WIZE01 100
- Water meter model – ZENNER
ETKD-ZR (ETKD-M, ETKD-M-P)
- Pulse coefficient – 1 pulse per 1 liter
- Operating temperature – 1 °C … 60 °C