Jooby Outdoor Gateway LoRaWAN 300 EU
Gateway for data acquisition in LoRaWAN networks
Designed to receive data from radio modules, the Jooby Outdoor Gateway LoRaWAN takes the required information and transmits it to a server. The gateway receives the data via the LoRaWAN wireless network and then sends it to the server for converting and further processing.
Reliable data protection is provided by the gateways’ industrial-grade components, while a series of mounts and accessories ensure its convenient operation. Special technical solutions can be included in the bundle at the customer’s request.
The device can use up to 8 available LoRaWAN* channels for operation. This model is not equipped with a backup battery.
*LoRaWAN® is a mark used under license from the LoRa Alliance®
- Enclosure IP67 industrial plastic enclosure with all necessary cable glands
- LoRa Concentrator One module as default for up to 8 channels
- Backhaul LTE and Ethernet
- Remote data collection LoRaWAN
- Power Supply PoE (802.3af) with surge and lightning protection
- Backup Power —
- Interface Web UI
- Geopositioning GNSS (GPS/GLONASS/Galileo/BDS/QZSS/SBAS)
Product information
- Description
- Downloads
HOW IT WORKS
The gateways operate within range of a cellular network, being positioned near a cluster of radio modules that accumulate a variety of information. For example, the gateway could be installed near a residential complex, where radio modules are used to collect data from resource meters (water, gas & electricity). Data is gathered by the radio modules and transmitted to the gateway over the LoRaWAN network. The gateway then sends the received information to the destination server for data processing. LAN is also used to transfer data from the gateway to the server.
SPECIFICATION
| Feature | Specifications |
| Computer component | Arm Cortex-A7, DDR3 RAM 512MB, 8GB eMMc (optional 16GB eMMc) |
| LoRaWAN
|
Typical sensitivity level (EU868/US915): -141dBm at SF12 BW 125kHz -127dBm at SF7 BW 125kHz -111dBm at FSK 50kbps
|
| LTE | Supports Quectel EG915N – LTE-FDD(B1/B3/B7/B8/B20), GSM (EGSM900/DCS1800) |
| GNSS | Integrated Module into the LTE-module EG915N |
| Power Supply | PoE (IEEE 802.3af/at-compliant) — 42~57 A DC |
| Power Consumption | 10 W (max.) |
| Ethernet | RJ45 (10/100Mbps) with surge protection and lightning protection (optional) |
| Antenna | N-type connector
Built-in antennas for GNSS and LTE |
| Protection degree | IP67 |
| Enclosure material | Plastic HB UL-94 |
| Weight | Approximately 0.75kg |
| Dimension | 262 mm x 146 mm x 66 mm |
| Operating temperature | -40 ˚C to +60 ˚C |
| Storage temperature | -40 ˚C to +85 ˚C |
| Operating humidity | 0% to 95% (non-condensing) |
| Storage humidity | 0% to 95% (non-condensing) |
| Installation method | Pole or Wall mounting |
Radio Frequency Specifications
LoRaWAN
| Feature | Specifications |
| Operating frequency | • EU868, US915 • on request — AS923, AU915, KR920, IN865 |
| Transmit power | 22 dBm (max.) |
| Receiver sensitivity | Typical sensitivity level (EU868/US915):
-141 dBm at SF12 BW 125 kHz -127 dBm at SF7 BW 125 kHz -111 dBm at FSK 50 kbps |
