JOOBY AQUARIS SNS WIAP01 100
Smart external connection sensor for W-Apator JS Master+ JS10-01 water meters
This inductive sensor is designed to transmit data from analog water meters to the pulse radio module Jooby OMNI RM LoRaWAN 4PU 204 EU.
This device is installed on the water meter’s enclosure and connected to the radio module. After activation, the sensor begins to accurately record the number of revolutions of the water meter’s measuring hand, transmitting this information to the pulse radio module.
*LoRaWAN is a registered trademark of Semtech Corporation.
- Remote data collection Apator water meters*
- Average lifetime 10 years (1 data transfer per day)**
- Mounting up to 5 minutes
*The complete list of compatible meter models is shown in the table below
**Service life depends on data transfer frequency
Product information
- Description
- Downloads
OPERATION PRINCIPLE
When the sensor is installed on the meter’s enclosure and the radio module is activated, the process of reading the information begins. Data is transmitted from the sensor to the radio module in the form of pulses, the number of which corresponds to the number of revolutions of the water meter’s hand or a multiple of it.
This information is transmitted via a special 1.5 meter long cable with a PY07-6 connector.
Collected information is stored in the radio module’s non-volatile memory. Then, at specified time intervals, it is automatically transmitted to the server of the resource provider via the LoRaWAN network.
The received data is processed by the metering system and transformed into visible readings. This process allows the supplier to observe and analyze resource consumption in real time.
Sensor Specifications
- Sensor model – Jooby Aquaris SNS WIAP01 100
- Water meter model — Apator JS Master +, S Master + JS10-01, JS Master + JS6,3-01
- Pulse coefficient – 1 pulse per 10 liter
- Operating temperature – 1 °C … 60 °C
