Jooby Outdoor Gateway LoRaWAN 403 EU
Gateway for data collection in the LoRaWAN network
The Jooby Outdoor Gateway LoRaWAN series has been produced to efficiently receive data from radio modules and relay it to a server. Operating through the LoRaWAN wireless network, the information received from the gateway undergoes encoding and is stored in the software, presented in the form of convenient reports.
With a focus on robust data protection, the gateways are equipped with industrial-grade components. For their ease of use, a variety of accessories and mounts are included. Upon the client’s request, the configuration can also incorporate specific technical solutions.
The device can use up to 16 available LoRaWAN* channels for operation. This model is equipped with a backup 12-volt battery with a capacity of 10,8 Ah.
*LoRaWAN® is a mark used under license from the LoRa Alliance®
- Enclosure IP67 industrial die-cast aluminium enclosure with all necessary cable glands
- LoRa Concentrator Dual modules for up to 16 channels
- Backhaul LTE and Ethernet
- Remote data collection LoRaWAN
- Power Supply PoE (802.3af) with surge protection and lightening protection
- Backup Power 12V 10.8Ah polymer lithium backup battery – optional. Using the backup battery provides up to 20 hours of autonomous work (fully charged, normal work conditions).
- Interface Web UI
- Geopositioning GNSS (GPS/GLONASS/Galileo/ BDS/QZSS/SBAS)
Product information
- Description
- Downloads
HOW IT WORKS
In order for cellular networks to operate, they require base stations. These are positioned near a network of sensors. For example, the gateway could be positioned close to homes that have radio modules for power, gas, and water. Data is gathered by radio modules from meters and transmitted to the gateway over the LoRaWAN network, before being sent by the gateway to a server for analysis via LAN networks.
SPECIFICATION
Feature | Specifications | |
Computer component | Arm Cortex-A7, DDR3 RAM 512 MB, 8 ГБ eMMc (optional 16 GB eMMc) | |
LoRaWAN | • Module: SX1302 or SX1303 mini PCIe card (maximum two mini-cards can be connected) • Channels: 16 channels • RX Sensitivity: Typical sensitivity level (EU868/US915): -141 dBm at SF12 BW 125 kHz -127 dBm at SF7 BW 125 kHz -111 dBm at FSK 50 kbps
|
|
LTE | Supports Quectel EG915N – LTE-FDD(B1/B3/B7/B8/B20), GSM (EGSM900/DCS1800) | |
GNSS |
Integrated Module into the LTE-module EG915N | |
Power Supply | PoE (IEEE 802.3af/at-compliant) — 42~57 A DC
Backup lithium-polymer battery DC-12-10800AH DC-12, 6 V; Power jack — 12 V DC |
|
Power Consumption | 10 W (max.) | |
Ethernet | RJ45 (10/100 Mbps) with surge protection and lightning protection (optional) | |
Antenna | 3N type connectors | |
Protection degree | IP67 | |
Enclosure material | Aluminum | |
Weight | Approximately 2.74 kg (with Backup battery) | |
Dimension | 220 mm x 220 mm x 104 mm | |
Operating temperature | -40 ˚C to +60 ˚C | |
Storage temperature | -40˚C to +85 ˚C | |
Operating humidity | 0% to 95% (non-condensing) | |
Storage humidity | 0% to 95% (non-condensing) | |
Installation method | Pole or Wall mounting |
Radio Frequency Specifications
LoRaWAN
Feature | Specifications | |
Operating frequency | • EU868, US915 • on request — AS923, AU915, KR920, IN865 |
|
Transmit power | 22 dBm (max.) | |
Receiver sensitivity | Typical sensitivity level (EU868/US915):
-141 dBm at SF12 BW 125 kHz -127 dBm at SF7 BW 125 kHz -111 dBm at FSK 50 kbps |