• Can be attached to any luminaire equipped with NEMA 7-pin socket
  • Controls the brightness of the luminaire over 0-10V/1-10V


  • Can be attached to any luminaire equipped with NEMA 7-pin socket
  • Controls the brightness of the luminaire over 0-10V/1-10V, DALI or PWM protocol (compatible driver required)
  • Operates in LoRaWAN network
  • Contains a fully functional computer to run a yearly day-by-day astro dimming program
  • Contains light sensor
  • Can be equipped with GPS module
  • Monitors the luminaire’s operation parameters and sends the data to the control software (CMS) for archiving and visualization

Technical data

Input voltage

120 – 280 V

Rated voltage frequency

50/60 Hz

Maximum load

500 W

Rated power, not exceeding

2,2 W

Rated power in standby mode, not exceeding

0,5 W

Luminaire dimming interfaces

0-10V, 1-10V, PWM, DALI

Sleep mode with keeping real time settings without external power, up to

5 days

Ingress protection degree by EN 60529

IP66 (when installed)


84 x 85 mm


0,210 kg

Luminaire control

The device can control luminaire’s brightness in 10-100% range with 1% accuracy

Luminaire monitoring and data collection

The control unit is capable to monitor more than 25 values regarding to luminaire’s operation, including:

  • Input voltage
  • Input current
  • Power consumption
  • Power factor
  • Total consumed energy
  • Total operation time
  • Temperature on the control board
  • External illuminance

Astro dimming function

Jooby Luminaire Control runs an astro calendar dimming algorithm to adjust brightness overnight as customer needs.

  • Real time based operation, with power backup in sleep mode to keep the settings if the luminaire is powered off
  • Yearly program is executes with or without live network connection
  • TALQ compliant
  • Up to 4 daily programs selected by rules (by date, week, month or weekday
  • On/off switching based on astro clock, time setting or light sensor
  • Up to 8 points of light level settings in each daily program


Wireless network

LoRaWAN network technology


Avenue Smart Cover utilizes LoRaWAN network technology. LoRaWAN is one of the most advanced and efficient standards for city scale IoT solutions:

  • Works within the frequence band requiring no licensing
  • Long effective connection range
  • Secure connection protected by two layers of cryptography
  • Low power consumption

LoRaWAN connectivity technical data


LoRa™ Spread-Spectrum class C

Receiver sensitivity

from -118 to -136 dBm

Data transfer speed

0,250 – 11 kbps 

Connection range at open line of sight

up to 15000 m



Frequency range 1

868,0 – 868,6 MHz

Transmitter power output

25 mW (14 dBm)

Duty cycle


Signal bandwidth

125 kHz



Frequency range 2

867,0 – 868,0 MHz

Transmitter power output

25 mW (14 dBm)

Duty cycle

<0,1 %

Signal bandwidth

125; 250 kHz



Frequency range 3 (receiving)

869,4 – 869,65 MHz

Duty cycle

<10 %

Signal bandwidth

125 kHz

ShortLink technology

The control unit is capable to operate in a ShortLink broadcast network for direct interaction between luminaires and sensor. This enables the dynamic lighting function (external motion sensor with LoRaWAN capability is needed), when a motion sensor triggering is lighting up appropriate luminaires to arrange a “lighting wave” before moving people or cars. ShortLink technology allows to keep the signal delay in the system below 0,01 s.

ShortLink connectivity technical data


LoRa™ Spread-Spectrum

Frequency range

869,7 – 870 MHz

Signal bandwidth

250 kHz

Duty cycle

No requirement

Transmitter power output

5 mW (7 dBm)

Receiver sensitivity

-120 dBm

Data transfer speed

0,250 – 11 kbps 

Line-of-sight propagation

up to 1 km

Wi-Fi auxiliary link


Jooby Luminaire Controller is equipped with a Wi-Fi module for maintenance purposes, like functions testing, reset, firmware upgrade etc

ShortLink connectivity technical data

Wi-Fi protocol

802.11 b/g/n

Frequency range

2,4 GHz – 2,5 GHz
(2400 MHz – 2483,5 MHz)

Transmitter power output

14 dBm (72,2 Mbps),
20 dBm (11b mode)

Receiver sensitivity (Data transfer speed)

from -72 to -98 dBm
(from 65 Mbps to 1 Mbps)





Net protocol


Line-of-sight connection range

up to 100 m

Motion sensor


The control unit can be equipped with a GPS module to measure the installation location coordinates at initial setup.

Option code



Coordinates accuracy


2,5 m

Coordinates acquisition time


32 s, 30 s,

Receiver sensitivity


-148 dBm

Light sensor


Jooby Luminaire Controller is equipped with optional light sensor to measure external illuminance and switch the light on and off based on this value.

Option code


Measurement range

0,01 – 83000 lux

Spectrum match to human eye



Light sensor measures illuminaice which comes to external sources, like sun, moon, city illumination, buildings etc. The sensor is not intended to measure the light produced by the luminaire, into which it is built.

Електричні характеристики

Габаритні розміри, мм100
Діапазон напруги живлення, В100
Споживана потужність, Вт100
Коефіцієнт потужності100
Світлова віддача, лм/Вт100
Світловий потік, лм100
Кути освітлення100
Колірна температура, K100
Індекс кольоропередачі (CRI)100
Ступінь захисту100
Температурний діапазон100
Посадковий діаметр100
Вага, кг100
Матеріал корпусу100
Строк служби100
× Порівняти
Мы используем cookie-файлы, чтобы оптимизировать работу сайта и предоставить вам лучший интерфейс; а также для продвижения нашей продукции. Ознакомьтесь с нашей политикой Cookie, чтобы узнать, как именно мы используем cookie-файлы, и как вы можете это контролировать.
Если вы продолжите пользоваться сайтом или закроете это сообщение — это значит, что вы согласны с нашей Политикой конфиденциальности и разрешаете использование cookie-файлов, как описано в политике Cookie.