Radio module with 2 pulse inputs
Remote data collection
At all metering points
Data transmission frequency
tampering detection alerts
< 5 minutes
ABOUT THE DEVICE
Equipped with a pulse counter, these radio modules collect readings from two utility meters at once. The data is transmitted over a LoRaWAN® wireless network to a server which then transforms the data into meter readings. Smart sensors detect any attempted tampering and immediately notify the Jooby RDC Dashboard about it.
These pulse radio modules enable utility companies, developers, housing cooperatives, management companies, and industrial enterprises to fully automate the metering collection process. All you need to get accurate consumption data is to install the smart modules on consumer metering devices.
HOW IT WORKS
The device is installed on the wall near metering devices with a DIN rail, cable tie, or self-tapping screws and is activated with the Jooby mobile app. The entire process takes only a few minutes, with no meter dismantling required.
The radio module is connected to utility meters (water, gas, heat, electricity) equipped with a pulse output, and registers the pulses they emit. The pulse count is stored in the module’s memory and transmitted over a LoRaWAN® wireless network to a server at fixed intervals for the compilation of reports.
The data is also kept in the module’s built-in non-volatile memory over the following periods for redundancy:
- 1 month for hourly consumption
- 4 months for daily consumption
The information can be submitted to the server either hourly or daily, depending on the customer’s preferences.
The module is powered by a high-capacity battery which ensures 5 to 15 years of continuous operation.
LoRaWAN® device class
Cyclic data transmission
Configurable (every 4 hours by default)
Remote change of data reporting intervals
Data storage in non-volatile memory, years (minimum)
Hourly usage log capacity, months
Daily usage log capacity, years
Event and error log capacity
Контроль під’єднання імпульсного входу
Battery status monitoring
ADR (Adaptive Data Rate) support
Wireless transmission specifications
Operating frequency, MHz
Transmitter power, mW
Receiver sensitivity, dBm
Data rate, bit/s
From 250 to 50,000
Communication range in conditions of urban development, km
Up to 5
Communication range in LOS conditions, km
Up to 15
Number of pulse inputs
Minimum pulse length, m/s
Minimum pulse pause, m/s
Maximum pulse frequency, Hz
Valid type of contact for pulse input
Operating temperature, °C
Body IP rating
Service life without battery replacement, years
From 5 to 15
For an up-to-date list of compatible devices, please contact firstname.lastname@example.org.
Power supply source
Battery voltage, V
Battery rated capacity, Ah
Overall dimensions, mm
77 × 34.5 × 44
Warranty period, years
Jooby RDC Dashboard
Collect and process utility consumption and device status information. This service enables utility companies, developers, housing cooperatives, management companies, and industrial enterprises to fully automate the collection of meter readings and access accurate data when they need it.
Optimize the processing of readings and make decisions driven by accurate data.
Build your own utility consumption tracking system
Jooby RDC Dashboard
Jooby Avenue’s smart luminaires light streets, parks, roads, bridges, and thermal power plants in Ukraine, Switzerland, and Denmark. Radio modules for utility meters and the Jooby RDC Dashboard solution enable automation of water, gas, heat, and electricity consumption tracking with minimal infrastructure investments.
Your message has been sent successfully
Thank you, we have received your message. The responsible manager will contact you shortly.
Your request has been sent
Thank you, we have accepted your request. In the near future the responsible manager will contact you and clarify the details of the order.